OnAC radios, you can not disable WPA 2 security through the web interface. This is not necessarily bad, however, what happens if you have a client that is reset and will only connect to the default ubnt SSID?
Fortunately there is a way to disable the WPA2 Preshared key.
- Log into the device over ssh.
- Run the following command to disable WPA2 in the config
sed -i s/aaa.1.wpa.mode=2/aaa.1.wpa.mode=0/g /tmp/system.cfg
- Save the config file with
- Login to the client device and configure the SSID.
After you are done, you can click the enable button to re-enable Wireless Security.