{"id":2403,"date":"2019-05-18T05:37:43","date_gmt":"2019-05-18T05:37:43","guid":{"rendered":"http:\/\/www.incredigeek.com\/home\/?p=2403"},"modified":"2019-05-18T05:44:26","modified_gmt":"2019-05-18T05:44:26","slug":"cnmaestro-configuration-for-snmpv3","status":"publish","type":"post","link":"https:\/\/www.incredigeek.com\/home\/cnmaestro-configuration-for-snmpv3\/","title":{"rendered":"cnMaestro configuration for SNMPv3"},"content":{"rendered":"\n

The following works for setting the snmpv3 configuration on cambium 450i 900’s. Once applied it’ll run change the SNMP settings and reboot the radio. <\/p>\n\n\n\n

You’ll need to find the hashed password which can be found in a config backup.
Change the SNMP username\/community as needed.<\/p>\n\n\n\n

{
     \"userParameters\": {
         \"snmpConfig\": {
             \"user2Group\": 0,
             \"snmpv3EngineId\": \"007000a9840a003e464e7a\",
             \"rwAuthPasswordEncrypted\": \"3e5h24a694a515e81abb6b25986cea91\",
             \"commStringROnly\": \"rocommunitystring2\",
             \"user2PrivPassword\": \"\",
             \"user1AuthPassword\": \"\",
             \"snmpv3AuthProt\": 0,
             \"snmpv3TrapEnable\": 0,
             \"snmpv3PrivProt\": 0,
             \"snmpMibPerm\": 1,
             \"roAuthPasswordEncrypted\": \"3e5h24a694a515e81abb6b25986cea91\",
             \"commStringRW\": \"communitystring\",
             \"userGroup1\": 0,
             \"user1Enable\": 0,
             \"snmpv3SecLvl\": 2,
             \"user2Enable\": 0,
             \"rwUserName\": \"Canopy\",
             \"roUserName\": \"snmpv3user\",
             \"roPrivPasswordEncrypted\": \"3e5h24a694a515e81abb6b25986cea91\",
             \"userName1\": \"\",
             \"snmpPort\": 161,
             \"rwUserEnable\": 0,
             \"trapDomainNameAppend\": 0,
             \"rwPrivPasswordEncrypted\": \"3e5h24a694a515e81abb6b25986cea91\",
             \"user1PrivPassword\": \"\",
             \"userName2\": \"\",
             \"user3PrivPassword\": \"\",
             \"user2AuthPassword\": \"\",
             \"userName3\": \"\",
             \"user3Enable\": 0,
             \"snmpTrapPort\": 162,
             \"user3AuthPassword\": \"\",
             \"user3Group\": 0,
             \"trapDelayAfterBootup\": 5,
             \"snmpIpAccessFilter\": [
                 {
                     \"address\": \"192.168.0.0\",
                     \"netmask\": 24
                 },
                 {
                     \"address\": \"10.0.1.0\",
                     \"netmask\": 24
                 },
                 {
                     \"address\": \"0.0.0.0\",
                     \"netmask\": 0
                 },
                 {
                     \"address\": \"0.0.0.0\",
                     \"netmask\": 0
                 },
                 {
                     \"address\": \"0.0.0.0\",
                     \"netmask\": 0
                 },
                 {
                     \"address\": \"0.0.0.0\",
                     \"netmask\": 0
                 },
                 {
                     \"address\": \"0.0.0.0\",
                     \"netmask\": 0
                 },
                 {
                     \"address\": \"0.0.0.0\",
                     \"netmask\": 0
                 },
                 {
                     \"address\": \"0.0.0.0\",
                     \"netmask\": 0
                 },
                 {
                     \"address\": \"0.0.0.0\",
                     \"netmask\": 0
                 }
             ],
             \"snmpTrapAddresses\": [
                 \"0.0.0.0\",
                 \"0.0.0.0\",
                 \"0.0.0.0\",
                 \"0.0.0.0\",
                 \"0.0.0.0\",
                 \"0.0.0.0\",
                 \"0.0.0.0\",
                 \"0.0.0.0\",
                 \"0.0.0.0\",
                 \"0.0.0.0\"
             ]
         },
 }<\/pre>\n\n\n\n
 <\/p>\n","protected":false},"excerpt":{"rendered":"
The following works for setting the snmpv3 configuration on cambium 450i 900’s. Once applied it’ll run change the SNMP settings and reboot the radio. You’ll need to find the hashed password which can be found in a config backup.Change the … Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[130],"tags":[629,628,627,501,133,360],"class_list":["post-2403","post","type-post","status-publish","format-standard","hentry","category-snmp","tag-450i","tag-cambium","tag-cnmaestro","tag-config","tag-snmp-2","tag-snmpv3"],"_links":{"self":[{"href":"https:\/\/www.incredigeek.com\/home\/wp-json\/wp\/v2\/posts\/2403","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.incredigeek.com\/home\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.incredigeek.com\/home\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.incredigeek.com\/home\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.incredigeek.com\/home\/wp-json\/wp\/v2\/comments?post=2403"}],"version-history":[{"count":3,"href":"https:\/\/www.incredigeek.com\/home\/wp-json\/wp\/v2\/posts\/2403\/revisions"}],"predecessor-version":[{"id":2434,"href":"https:\/\/www.incredigeek.com\/home\/wp-json\/wp\/v2\/posts\/2403\/revisions\/2434"}],"wp:attachment":[{"href":"https:\/\/www.incredigeek.com\/home\/wp-json\/wp\/v2\/media?parent=2403"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.incredigeek.com\/home\/wp-json\/wp\/v2\/categories?post=2403"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.incredigeek.com\/home\/wp-json\/wp\/v2\/tags?post=2403"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}